N-Scale Statuary Helps Tell a Layout’s History

A few weeks ago I wrote about Lts. Benjamin and Henry who discovered Many Lost Ways and founded Salvation Point, the fictional National Park and town upon which the freelanced FCFL is based.

The story inspired a little urban revitalization project near the Salvation Point depot, including a monument to the explorers.

IMG_3124I started with a pair of figures from a set of Woodland Scenics HO scale people. I cut a small oval of thin styrene sheet, beveled the edges with a sanding block, and mounted the figures to it with plasic cement. I sprayed the statue with a bronze “hammered metal finish” spray paint and set it aside to dry.

I made the rest of the monument from a thicker square of styrene and again beveled the edges with a sanding block. I drilled a pair of 1/16 holes in two corners. For the plaque, I cut the top from one of the surplus old-timey gas pumps from the Walther’s “Al’s Victory Service” kit I recently completed and glued it centered between the holes. I painted this assembly with Pollyscale Aged Concrete, and filled in the plaque with Pollyscale Rail Brown.

When the pedestal was dry, I glued the statue to it with plastic cement. I gave the entire piece a wash of India ink diluted in rubbing alcohol. Finally, I “planted” Woodland Scenics field grass in the two holes and mounted the entire piece on the layout.

I’m not breaking new ground with statuary from figures of a different scale. Model railroaders have been doing that for years. But I think the little monument is a unique lineside structure and helps tell the story of the FCFL.

Plus, it’s the only way I can get those two to stand still.




Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s